PS2-100
Self install high efficiency solar pump system
LORENTZ PS2-100 is a high quality, high efficiency, cost effective solar pump system designed for self installation.
PS2-100
Pick it up
a ready to go, system in a box
Plug it in
no wiring to do, just plug in and go
Pump water
from any source: pond, stream, well
Installing a solar pump was never this easy
PS2-100 is a complete system in a box, ready to take away and carry under your arm. Installation is very easy, just connect the plugs and start pumping water. Everyone can set it up with no prior knowledge required. Even the pipe connection fits standard 1“ hoses, just attach your hose and you are ready to go within a few minutes!
Harvest the power of the sun without recurring costs for fuel
The system runs directly from solar, pumping water through the day. The high efficiency means enough water is pumped during the day and can be stored in a tank for night time use if needed. In contrast to fuel pumps, daily filling up is not needed.
There are no expensive batteries required, no fuel top-ups, no maintenance.
Pump water from any source
Being a submersible pump, you are not limited to the water sources that you can pump from. Pumping water from a well, pond, tank or lake can all be done without being concerned about suction head limits as you would be with a surface pump. A surface pump cannot be installed within the water source, and if it is installed above it, it can only pump water from a few metres deep. The PS2-100, in contrast, can pump up to 40m head and you can easily use it for a well!
or a pond
a river…
Pump from a well…
Small pump, a lot of water
The PS2-100 system provides over 20,000 liters of water per day and pumps up to 40 meter heads.
This serves a wide range of opportunities in providing drinking water, water for livestock and for irrigation.
Use it for drinking water…
livestock…
or irrigation
Whatever other manufacturers might claim, this is…
OFFICIALLY
THE MOST EFFICIENT SOLAR PUMP
– Award-winner of the 2019 Global LEAP Awards –
Global LEAP Awards is supported by UK Aid, US Aid and Power Africa
Calculate PS2-100 water output
Total dynamic lift TDH
Daily flow
The pump is flexible to serve a wide range of flow and head requirements and designed for the long life needed in productive use cases such as livestock water and for irrigation. It is also suitable for drinking water use for homes.
- There are three different pumps to choose from in the PS2-100 range: HR-23, HR-14 and HR-07.
- The chart shows the daily water that will be pumped at different vertical heads.
- Measure the vertical distance that you need to pump water and look on the bottom axis, read across to the left to see how much water to expect per day.
Data provided is the annual daily average based on using a single 205 Wp PV module at location 15N 0E. There are three pump end variants that cover the range of head and flows, please ask your retailer for advice on choosing the one to meet your needs.
Download: PS2-100 brochure
Download: PS2-100 brochure
